A rose gold curtains add elegance to a living room. Silk taffeta rose gold curtains are easy to work with and these curtains are a good sewing project for turning beginners. Measure the window to calculate the curtain length, determine how far past the bottom of the window the curtain will end. Add 6 inches for top and bottom edges.
Measure the window to determine the curtain panel width, for a two panel treatment that will open in the middle. For each panel, measure half the window width and multiply by 2, adding 6 inches to page layout. These measurements will determine your running length needed for this project. Cut the fabric for rose gold curtains to the determined measurements and home sides. Top and bottom by folding the edges over 1-1 / 2 inches twice, pinning the hems in place. And then sew with a straight stitch. Make the tab tops by cutting the tab fabric pieces 3 inches long and 12 inches long. A default window panel gets six tabs. Cut 10-inch pieces of fuse straps and secure them to the center of the tabs on the wrong side of the fabric.
12 Photos Gallery of: Style Rose Gold Curtains
Then for install rose gold curtains, pin the tabs to the top of the curtain panel. Then spacing them evenly while placing the first and last tabs edges of the panel. Attach tabs to curl top edge 2 inches down from edge. And with hand sew buttons instead through layers of top of the tab, curtains and a tab at the top back. Then cut beaded niche actors to measure panel width. Needle beaded fringes that are attached to the nail binding; the seam must be on the wrong side of the curtain panel.