Wingback dining chair are the easiest wallpaper job you can find in your home. New covers can light up a sad room and refresh your furniture, all for a minimal expense and a few minutes of work on each chair. Just pull the old lid and staple it on. Because you save money on work, find the best cover material you can afford.
Tips to recreate dining chair
Assemble your tools. You need a powerful handgun with leaf edges staples. Bent pliers are useful with staples (or stuck staples). Other than that, all you need is common hand tools. Find a large flat space to work so you can upend the chair and cut the fabric. Remove the old pad. Most wingback dining chair consists of a chair frame and a pillow board that is covered with padding and fabric and attached to the frame with four wooden screws in each corner.
12 Photos Gallery of: How to Recreate Wingback Dining Chair
Use a screwdriver with a long shaft to remove the fastening screws from each corner. Remove the seat and set the image upright so that the screws fall out. Pick them up and put them aside so that the cat does not hit them under the bed. Examine the wingback dining chair cover and padding. If it is in good condition (or even if the fabric is worn but the padding is good), you can put the new fabric right over the old one. However, if the old padding carried by or worn apartment, remove the fabric and padding and replace the old padding with one-inch upholstery foam, just cut slightly larger than the seat board so it hangs over the upper edge.