Massage office chair – Although it sounds scary, reupholsting an office chair is actually one of the easiest furniture to recover. The fabric is necessary to finish the job is minimal, and the whole process is quite straightforward. There is no sewing involved. Within a short time, you can give your office chair a whole new look.
Remove the massage office chair by removing the back of the chair, backrest, seat and seat cushion. Remove the old fabric from the seat back and seat cushion. Measure the fabric requirements with a tape measure. Add two inches to all sides to staple the new fabric under the cushions. Cut the chair back and the seat cushion pieces from the fabric.
12 Photos Gallery of: Massage Office Chair Ideas
Put the massage office chair back the fabric piece on a flat surface face down. Place the back piece over the fabric and center it. Start stapling the fabric on the chair back. Place the first staple in the center of an edge. Tighten the fabric straight away from the first staple on the opposite edge. Repeat with the remaining two edges. Make sure that some fabric covers the plugs on the pillows that need to be inserted back into the chair to put the chair together. Cut off excess fabric. Slide the seat and seat backrests back to their seats on the chair. With careful pressure, they should snap back in place to end the reupholstering project.