Wood dining chairs are easier to do than many types of furniture, and depending on when you use and how it is done, the chairs can look either rustic or ultra-modern. As with other wooden furniture, cushions can make the chairs more comfortable and can completely change their appearance
Cut the plank in the middle. Make your seat and back legs. From 15 inches from one end of one of the planks, cut 2 inches off each side. Sand these edges, and around them if you want. Make the wood dining chairs back and forward the leg. Center the smaller end of the back leg on the other shelf 15 1/2 inches from one end. Trace the end, then put the plank aside. Cut the hole you’re tracking just make it 1/4 inch bigger on each side than traces the brand.
12 Photos Gallery of: Making Wood Dining Chairs
Assemble the two planks together. With the wood dining chairs set up, sit in it to determine if it’s comfortable. When you are fit with fit, trim the ends of the legs so that it rests on the ground instead of on the edge. Take two pieces of wood apart and sand and round each edge to your liking. Make sure both parts are clean, and then paint and shellac worked to protect it.
Tips and warnings
You can make your dining chairs more accurate through the carving chair back, or by gluing wood appliqués to it. Make your first chair cheap, even plywood, so you can determine the exact measurements that suit your taste best before cutting into more expensive decorative wood.